fender compatibility |
Post Reply |
Author | |
andyjman83
Member Joined: 15-September-2014 Location: so cal Status: Offline Points: 66 |
Post Options
Thanks(0)
Posted: 08-October-2014 at 4:37PM |
Hey guys quick question.
I'm looking for a replacement front fender for my 72 ranchero gt. I found a few cars at ctc auto ranch, and I'm curious about compatibility. I found a 74 torino, and a 74 ranchero and they both have the front drivers side fender. Even though the grille looks different, are they compatible on the torino? How bout the ranchero? Also, I was on macs auto parts and they have a fender listed, but they are calling it a skin, but it looks like a whole fender. It also says something about not covering the sail panel. Here's the link http://www.macsautoparts.com/ford_fairlane_torino/full-quarter-panel-skin-right-torino-1972-1976.html?crosssell=Homepage_Featured_Category_Body+Parts++%0D%0A#tabs-container Is this a whole "fender" as in the exterior part, or are these fenders like newer cars where there's a frame underneath and the skin has to be welded on. That's a good deal on one since I can't find one in good shape. Also, what's the sail panel? Sorry for asking stupid questions, I'm just a bit confused. |
|
Grantorinosport351
Senior Member Joined: 11-August-2013 Location: Nocona tx Status: Offline Points: 1312 |
Post Options
Thanks(0)
|
i believe it is 72's only......72 chero, torino, wagon, and gran torino........i have a 72 chero fender in good shape
Edited by Grantorinosport351 - 08-October-2014 at 5:56PM |
|
~Bryan
72 gts h-code (formal roof) 67falcon 04 f250 ''the great white'' |
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
I fixed the link for you: http://www.macsautoparts.com/ford_fairlane_torino/full-quarter-panel-skin-right-torino-1972-1976.html?crosssell=Homepage_Featured_Category_Body+Parts++%0D%0A#tabs-container No, that will not fit your front fender. That part is for a rear quarter panel of a 1972 through 1976 Torino, it is not a front fender part. I have posted a picture below of the part that you are referring to.Edited by dave302 - 08-October-2014 at 5:51PM |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
the sail panel is the part on the inside of the car it's like a headliner "extension" on the "C" pillar
torino and ranchero are the same from the back of the doors forward, but 72's are unique to their style of front bumper/grill 73-76 are 73-76 for fenders and hoods, so to answer your question you need a 72 torino/ranchero fender! NOS: http://www.ebay.com/itm/NOS-1972-FORD-TORINO-FRONT-FENDER-LH-/351137748420?pt=Vintage_Car_Truck_Parts_Accessories&hash=item51c170d5c4&vxp=mtr |
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
Grantorinosport351
Senior Member Joined: 11-August-2013 Location: Nocona tx Status: Offline Points: 1312 |
Post Options
Thanks(0)
|
the panel in the link is a rear replacement quarter panel for a gts......i think the sail panel is the panel that goes across above the trunk lid
^^link didnt work for me john^^ Edited by Grantorinosport351 - 08-October-2014 at 5:53PM |
|
~Bryan
72 gts h-code (formal roof) 67falcon 04 f250 ''the great white'' |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
no, the sail panel is on the inside goes between the head liner and the top of the rear seat to the rear window.
|
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
it just worked for me??? (you must have a stupid i-phone!)
|
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
Grantorinosport351
Senior Member Joined: 11-August-2013 Location: Nocona tx Status: Offline Points: 1312 |
Post Options
Thanks(0)
|
wth?!?! now it works?? lol im on my mac
almost 900 freaking bucks for a fender?!?!?! good lord Edited by Grantorinosport351 - 08-October-2014 at 6:01PM |
|
~Bryan
72 gts h-code (formal roof) 67falcon 04 f250 ''the great white'' |
|
andyjman83
Member Joined: 15-September-2014 Location: so cal Status: Offline Points: 66 |
Post Options
Thanks(0)
|
Lol, see and I thought it looked like a front fender lol.
Thanks for the ebay find btw |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
same thing---stupid apple |
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
yeah, thats an N.O.S. a bit pricey! but i checked another guy that has torino parts both his fenders are needing bodywork, probably not any better than yours. joe's probably got 10 of them!!!
|
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
There is a member who is parting out his 1972 Torino base model. You can click the following link to see his thread and contact him. http://forum.grantorinosport.org/parting-out-or-all-together-72-base_topic12595.htmlThere are pictures below of his fender.
|
|
andyjman83
Member Joined: 15-September-2014 Location: so cal Status: Offline Points: 66 |
Post Options
Thanks(0)
|
Looks like that's a squire fender as it has holes for the wood trim panels. I can just weld some pieces of steel on the backside and fill in the gap with body filler :-)
Nice find guys thanks a ton!!! Mines banged up good right behind the headlight bezel. Its also causing the hood to not open right |
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
Your Welcome.
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
There is also a 1972 ranchero gt being parted out right now. To see it Click here. There is a picture of this ranchero below.
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
Grantorinosport351
Senior Member Joined: 11-August-2013 Location: Nocona tx Status: Offline Points: 1312 |
Post Options
Thanks(0)
|
^^^iirc i contacted that guy on that chero and he didnt have much left....i belive i was looking for a fender too'^^^ but idk he might have one
|
|
~Bryan
72 gts h-code (formal roof) 67falcon 04 f250 ''the great white'' |
|
Montego01
Senior Member Joined: 16-December-2012 Location: Largo Status: Offline Points: 565 |
Post Options
Thanks(0)
|
Isn't a 72 fender specific to because they have the valance panel and the 73-up do not.
So the bottom of the fender is shaped different. That's how I've always been able to tell the 72 Montego fenders from the 73-up. I've always considered the sail panel the section that goes from the quarter onto the roof. |
|
Rockatansky
Senior Member Joined: 30-July-2010 Location: On The Road Status: Offline Points: 6072 |
Post Options
Thanks(0)
|
yup that's the sail panel both exterior & interior, because it generally looks like a sail
|
|
72 GT Ute
|
|
unlovedford
Senior Member Joined: 17-December-2010 Location: Tennessee Status: Offline Points: 10142 |
Post Options
Thanks(0)
|
The first foot of the fender is 1972 specific, after that, it is identical to the 1973-1976.
|
|
Joe
1972 Mom's Squire Wagon 1972 Torino Wagon 1976 Torino 1968 Cougar XR7-First batch 1972 Torino 460 1989 BroncoII/Jeeps/Titanimous Popeye and Brutus (Rams) |
|
Rockatansky
Senior Member Joined: 30-July-2010 Location: On The Road Status: Offline Points: 6072 |
Post Options
Thanks(0)
|
except for the inner support brace, after mid 1973?
Ford
|
|
72 GT Ute
|
|
unlovedford
Senior Member Joined: 17-December-2010 Location: Tennessee Status: Offline Points: 10142 |
Post Options
Thanks(0)
|
True, although I have encountered later ones without that extra brace. May be early aftermarket or mis-stamped Ford units.
|
|
Joe
1972 Mom's Squire Wagon 1972 Torino Wagon 1976 Torino 1968 Cougar XR7-First batch 1972 Torino 460 1989 BroncoII/Jeeps/Titanimous Popeye and Brutus (Rams) |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |