delayed wiper switch |
Post Reply |
Author | |
fordpower
Senior Member Joined: 02-September-2010 Location: willseyville,ny Status: Offline Points: 1766 |
Post Options
Thanks(0)
Posted: 12-July-2017 at 5:28AM |
Does anyone know were it mounts under dash.At 72 I would like to have an idea were to look before I attempt to get under the dash.
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
The connecting wires from the wiper switch to the delayed wiper relay are very short, so it should be mounted right behind the wiper switch in the dash board. The other short wires are for the connection plug to the wiper motor. There are three pictures below of the wiper motor switch, the delayed wiper relay and the connection plug to the wiper motor.
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
|
|
aquartlow
Senior Member Joined: 19-December-2011 Location: Summerfield, Fl Status: Offline Points: 2271 |
Post Options
Thanks(0)
|
The bracket for the wiper governor mounts between the wiper switch and left knob of the radio on the firewall side and above the lower portion of the dash. There is a metal bracket that runs across the bottom of the plastic dash, which reinforces the lower dash, the governor mounts to that. The mounting screws for the governor go through the plastic dash, the metal reinforcement bracket then thread into the governor mounting bracket. The screws are spaced about 1.5-2" apart(been a while since I messed with my interval wiper governor) and are blunt on the end to keep from piercing wires under the dash. Hope this helps.
|
|
www.supermotors.net/22468
Yeah, It's a Hybrid...It burns gas and tires. No matter how good she looks, somebody, somewhere, is tired of her sh*t. Beauty is skin deep, ugliness goes clear to the bone. |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
on the 77-79 cars it's mounted to the dash brace like todd said, on the earlier cars it's mounted to the upper plastic part of the dash above the gauge cluster
|
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
fordpower
Senior Member Joined: 02-September-2010 Location: willseyville,ny Status: Offline Points: 1766 |
Post Options
Thanks(0)
|
Thank you was trying to mount near steering column but could only find one hole.Lets be true took 2yrs to find the plug.
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
Your welcome
|
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
bob, when i added the delay unit assembly to my car, i didn't know where it mounts so i just drilled a 1/8" hole with a self tapper screw to the steering column brace I've since found where they mount having remove some from cars
|
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
fordpower
Senior Member Joined: 02-September-2010 Location: willseyville,ny Status: Offline Points: 1766 |
Post Options
Thanks(0)
|
Thats were I was headed
|
|
andrewok1
Senior Member Joined: 02-June-2015 Location: OCALA FL Status: Offline Points: 424 |
Post Options
Thanks(0)
|
i MOUNTED MINE A COLUMN BRACE. its all good just do not pinch wires
|
|
GET IT GOT IT GONE !!!!!!!
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |