rear swaybar |
Post Reply |
Author | |
fordpower
Senior Member Joined: 02-September-2010 Location: willseyville,ny Status: Offline Points: 1766 |
Post Options
Thanks(0)
Posted: 24-April-2016 at 10:22AM |
What do I need to put sway bar from parts car on driver. Driver never had a sway bar.
Still waiting on new stripes,hope other ones come off easy. |
|
Dan the ranchero man
Senior Member Joined: 24-July-2011 Location: Mchenry,IL Status: Offline Points: 1174 |
Post Options
Thanks(0)
|
The swaybar used on the 72-79 Ford midsize car will need the following from your parts car. take both side of these parts pictured.
Then take a look at all the parts in grey that hold on the sway bar to the axel. Take all these as well. The rubber mounts used for the end links (first photo) are no longer available. But here is the Ford part # for the end link kit. (D4OZ-5A486-A). Sometimes you get lucky and find these on e-bay. |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(0)
|
i can give you part #'s for urethane stuff that fits, if you need
** energy suspension bushings for the upper mounts: 9.8101g (black) Edited by californiajohnny - 25-April-2016 at 4:25PM |
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
fordpower
Senior Member Joined: 02-September-2010 Location: willseyville,ny Status: Offline Points: 1766 |
Post Options
Thanks(0)
|
Thanks wonder if frame is already drilled.
|
|
72FordGTS
Admin Group GTS.org Admin Joined: 06-September-2005 Location: Ontario, Canada Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
The frame should be pretty drilled.
|
|
Vince
1972 Ford GTS Sportsroof - Survivor, One Family car GTS.org Admin |
|
aquartlow
Senior Member Joined: 19-December-2011 Location: Summerfield, Fl Status: Offline Points: 2271 |
Post Options
Thanks(0)
|
IIRC, I have seen some of the end link to chassis brackets welded in, not just bolted in. This could be on the 77-79 models, I did see where the earlier intermediates(even Marks and T-birds) had the brackets that were bolted to chassis(like as pictured above).
|
|
www.supermotors.net/22468
Yeah, It's a Hybrid...It burns gas and tires. No matter how good she looks, somebody, somewhere, is tired of her sh*t. Beauty is skin deep, ugliness goes clear to the bone. |
|
Dan the ranchero man
Senior Member Joined: 24-July-2011 Location: Mchenry,IL Status: Offline Points: 1174 |
Post Options
Thanks(0)
|
All of the ones I have seen are bolted in and yes the holes are "in there" .
|
|
fordpower
Senior Member Joined: 02-September-2010 Location: willseyville,ny Status: Offline Points: 1766 |
Post Options
Thanks(0)
|
Thanks.Did ltd2 ever have power seats? Can't find my options sheet.Know there were 60+ of them.
|
|
Dan the ranchero man
Senior Member Joined: 24-July-2011 Location: Mchenry,IL Status: Offline Points: 1174 |
Post Options
Thanks(0)
|
Yes the LTD II's had power seats as an option. If you can't find them from an LTD II and want to stay era correct you get them out of a 77-79 ranchero/cougar or t-bird.
Edited by Dan the ranchero man - 25-April-2016 at 1:38PM |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |