Neville - axle specs |
Post Reply |
Author | |
JimW
Senior Member Joined: 09-December-2003 Location: USA Status: Offline Points: 602 |
Post Options
Thanks(0)
Posted: 06-September-2005 at 1:52AM |
Do you have the measurements you used to buy your axles? I won't be able to pull both sides to measure and I will be needing to purchase those 31 spline Mosers shortly..
Jim |
|
1976 S&H Gran Torino
460/C6/4.33 13.05@105.6 545/C6/3.56 11.52@117.8 More to come!!!! 463rwhp/495rwtq two tons of fun see it and hear it at: www.torinocobra.com www.st |
|
Torinogts73c
Senior Member Joined: 14-February-2004 Location: Tucson Arizona Status: Offline Points: 1034 |
Post Options
Thanks(0)
|
Jim according to my Ford parts book the right side should be 32 7/16 " long and the left side is 29 51/64 " hope that helps you out. Gary
|
|
Gary 73 Gran Torino Sport 351CJ,17 Mustang Ecoboost,15 Jeep Grand Cherokee LTD, Ford Ranger parts hauler
"Never complain Never explain" Henry Ford |
|
JimW
Senior Member Joined: 09-December-2003 Location: USA Status: Offline Points: 602 |
Post Options
Thanks(0)
|
I wonder if I can get the rest of the specs for the order sheet from the drivers side (the way my garage is, I only have clearance on one side or the other).. Is the spec the same from 72-76? Thanks! Jim Edited by JimW |
|
1976 S&H Gran Torino
460/C6/4.33 13.05@105.6 545/C6/3.56 11.52@117.8 More to come!!!! 463rwhp/495rwtq two tons of fun see it and hear it at: www.torinocobra.com www.st |
|
Torinogts73c
Senior Member Joined: 14-February-2004 Location: Tucson Arizona Status: Offline Points: 1034 |
Post Options
Thanks(0)
|
I believe so Jim but I will verify that at work tomorrow I can't imagine they would change them on the later cars. as a matter of fact the old part numbers were D6OZ which would be 76 and later. Gary
|
|
Gary 73 Gran Torino Sport 351CJ,17 Mustang Ecoboost,15 Jeep Grand Cherokee LTD, Ford Ranger parts hauler
"Never complain Never explain" Henry Ford |
|
JimW
Senior Member Joined: 09-December-2003 Location: USA Status: Offline Points: 602 |
Post Options
Thanks(0)
|
Excellent, do they have bearing diameters and such as well in those specs? Jim |
|
1976 S&H Gran Torino
460/C6/4.33 13.05@105.6 545/C6/3.56 11.52@117.8 More to come!!!! 463rwhp/495rwtq two tons of fun see it and hear it at: www.torinocobra.com www.st |
|
Torinogts73c
Senior Member Joined: 14-February-2004 Location: Tucson Arizona Status: Offline Points: 1034 |
Post Options
Thanks(0)
|
There are only 2 bearings that ford used ball or a roller type should have the specs for you later today. Gary
|
|
Gary 73 Gran Torino Sport 351CJ,17 Mustang Ecoboost,15 Jeep Grand Cherokee LTD, Ford Ranger parts hauler
"Never complain Never explain" Henry Ford |
|
JimW
Senior Member Joined: 09-December-2003 Location: USA Status: Offline Points: 602 |
Post Options
Thanks(0)
|
Thanks a bunch!! I hope I can get the axles and install them before the end of the month so I can get some 1/8 times in Indiana... Jim |
|
1976 S&H Gran Torino
460/C6/4.33 13.05@105.6 545/C6/3.56 11.52@117.8 More to come!!!! 463rwhp/495rwtq two tons of fun see it and hear it at: www.torinocobra.com www.st |
|
Nevsryd
Senior Member Joined: 28-July-2005 Location: United States Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Jim, Sorry for not getting back to you sooner, I have been swamped with work and the kid is playing football so I'm out late every night. The specs which you got are close to what I ordered. Here is what I ordered. 30" and 32.5 The bearing package # is 9507F 2.834/1.977 #8030 Stock Ford 1/2-20X1 1/2" .615 Knurl #9750 Sm Brg Ford Retainer Plates. Not sure which brakes you have, just check before ordering. If you or anyone is interested I have a set of 28-spline Mosser axels that I barely used that will fit. P.S. Am going to try to get ot the track tomorrow night and break that 11 second barrier. Nev
|
|
JimW
Senior Member Joined: 09-December-2003 Location: USA Status: Offline Points: 602 |
Post Options
Thanks(0)
|
Ordered a set of 31's. Interesting difference, I have the big bearing rear, started in 1973 I think.. Jim |
|
1976 S&H Gran Torino
460/C6/4.33 13.05@105.6 545/C6/3.56 11.52@117.8 More to come!!!! 463rwhp/495rwtq two tons of fun see it and hear it at: www.torinocobra.com www.st |
|
Torinogts73c
Senior Member Joined: 14-February-2004 Location: Tucson Arizona Status: Offline Points: 1034 |
Post Options
Thanks(0)
|
That's right 73 had the large rear wheel brgs. Alot of 72's got upgraded because Ford had a recall on all 72 9" rear axles and a lot of bearing failures. The retainers would break and the axle would work it's way out as you were driving! Fun eh?? Gary
|
|
Gary 73 Gran Torino Sport 351CJ,17 Mustang Ecoboost,15 Jeep Grand Cherokee LTD, Ford Ranger parts hauler
"Never complain Never explain" Henry Ford |
|
JimW
Senior Member Joined: 09-December-2003 Location: USA Status: Offline Points: 602 |
Post Options
Thanks(0)
|
Neville, How'd it go?
|
|
1976 S&H Gran Torino
460/C6/4.33 13.05@105.6 545/C6/3.56 11.52@117.8 More to come!!!! 463rwhp/495rwtq two tons of fun see it and hear it at: www.torinocobra.com www.st |
|
Nevsryd
Senior Member Joined: 28-July-2005 Location: United States Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Didn't make it this weekend. Had to work Saturday and Sunday, will be going for sure this weekend come Hell or High Water. I've worked everyday since 8/18. Friends of mine and I may be renting a track for a day later this month it is by Pottstown. Costs $60.00 for the day let me know if you might be interested and I will give you more details when they are available Nev |
|
JimW
Senior Member Joined: 09-December-2003 Location: USA Status: Offline Points: 602 |
Post Options
Thanks(0)
|
Car is in pieces, trying to get it done for the Indiana reunion on the 23rd... Finally installing the 3.55' and a higher stall converter.. Hoping for lower 7's in the 1/8 but who knows if the DR's will hold the track or not.... (all depends on their prep)
Jim |
|
1976 S&H Gran Torino
460/C6/4.33 13.05@105.6 545/C6/3.56 11.52@117.8 More to come!!!! 463rwhp/495rwtq two tons of fun see it and hear it at: www.torinocobra.com www.st |
|
Nevsryd
Senior Member Joined: 28-July-2005 Location: United States Status: Offline Points: 50 |
Post Options
Thanks(0)
|
OK, Good Luck!
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |