Print Page | Close Window

71 Ranchero bumper jack fits ?

Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: Ranchero Forum
Forum Description: Technical discussion for Rancheros
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=10446
Printed Date: 16-April-2024 at 1:33AM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: 71 Ranchero bumper jack fits ?
Posted By: David F.
Subject: 71 Ranchero bumper jack fits ?
Date Posted: 15-February-2014 at 5:12AM
Can anyone tell me is a 1971 Ranchero bumper jack is the same as a car, and or wagon?
Also is the 1970 the same?

Thanks, David


-------------
David



Replies:
Posted By: 210eddiep
Date Posted: 16-February-2014 at 5:33AM
I know that 70 and 71 are the same. I'm pretty sure cars are the same cause the front bumpers are the same.

-------------
Eddie


Posted By: Rockatansky
Date Posted: 16-February-2014 at 6:23AM
if you're planning to actually USE the finger tab bumper jack, you may want to think again?

many bumpers get tweaked from so much force concentrated in a small area. if the bumper has been removed & re-installed from factory there's more of a chance that the brackets are not in the best position to take the weight, then the outer skin takes it

-------------
72 GT Ute
   


Posted By: 210eddiep
Date Posted: 16-February-2014 at 6:37AM
Originally posted by Rockatansky Rockatansky wrote:

if you're planning to actually USE the finger tab bumper jack, you may want to think again?

many bumpers get tweaked from so much force concentrated in a small area. if the bumper has been removed & re-installed from factory there's more of a chance that the brackets are not in the best position to take the weight, then the outer skin takes it


Hadn't thought about that but you're probably right. My bumper jack stays in the shed. I keep a small floor jack behind the seat

-------------
Eddie


Posted By: Rockatansky
Date Posted: 16-February-2014 at 6:50AM
look at bumper jack car bumpers & you'll see it

-------------
72 GT Ute
   


Posted By: David F.
Date Posted: 16-February-2014 at 7:19AM
Thanks guys, I wasn't going to use it, it is for restoration purpose. I believe it should havea "J" type jack. Like this.

David




-------------
David


Posted By: 210eddiep
Date Posted: 17-February-2014 at 12:38AM
That's it. It should have front stamped on the bottom pin and rear on the top pin. Good luck on your restoration
Would like to see pics!

-------------
Eddie



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net