Big Block Engine Forum - hedman headers 85200?

Print Page | Close Window

hedman headers 85200?

Printed From: The Ford Torino Page
Category: Powertrain Specific Forum
Forum Name: Big Block Engine Forum
Forum Description: 429 and 460 engines
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=13044
Printed Date: 18-April-2024 at 1:48PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: hedman headers 85200?

Posted By: Beluski
Subject: hedman headers 85200?
Date Posted: 22-November-2014 at 7:01AM

Anyone have experience these on fitment on 72 torino with 460?
according hedmans and other pages they do nicely..

www.summitracing.com/int/parts/hed-85200/applications

anyone?

thanks.

Replies:

Posted By: Billy C
Date Posted: 02-December-2014 at 6:46PM

Looks interesting.. do they come in a coated version?

They aren't equal length and I believe the hookers are.. The hookers are on sale too!

-------------
-Billy Conturo

Posted By: dave302
Date Posted: 02-December-2014 at 8:17PM

Billy C wrote:

Looks interesting.. do they come in a coated version?

Yes, there is an advertisement on the hedman website which says:

Finish Type: Uncoated mild steel. All Hedman Husler Hedders are also available with the optional "HTC" (high-temp ceramic-metallic coating) "Silver", or BLACK MAXX (Black) Ceramic-Metallic coatings.

When you are on their webpage, just scroll down to part number 85200 and click on it and you will see it.

To go there http://www.hedmanhusler.com/site/?d=565&dt=108&callHandle=productList&start=10&limit=5" rel="nofollow - Click Here.

Or you can call them, there phone number is: 770- 6 Six 4- 8 Eight 8 Zero.

To contact them through Email: mailto:RaceTech@Hedman.com" rel="nofollow - Click Here.

Posted By: Beluski
Date Posted: 05-December-2014 at 8:26AM

Ok,i took my chances and bought a pair of these.in next couple of months we´ll know more about them..
orderd without coating so sliceing won´t hurt so much...i do have stock motormounts etc.

Posted By: Beluski
Date Posted: 30-November-2015 at 7:05AM

Well,got finally some update.
both sides,left and right needed to cut pretty hard in few points.left,problem with steeringbox,pitman arm.right was tougher,pitman arm and trans etc.
no problems with orginal motormounts,some clearance but not much.motor had to be lifted few inches to get them in place.coated them my self with techline black satin,see how it stays.

maybe i´ll post some pictures in future.