Honda ox sencer
Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: General Automotive Technical Discussion
Forum Description: Technical Automotive discussion of anything not specific to mid-size Ford/Merc
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=15355
Printed Date: 18-April-2024 at 3:04PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Honda ox sencer
Posted By: fordpower
Subject: Honda ox sencer
Date Posted: 29-July-2016 at 5:08AM
| Ok I know its not a ford but if anyone is going to a junk yard I need a an o2sencer It has to have 5 wires not 4 its for a vortec 2 .Why you ask because the damn thing cost 320 a reg one is 65. |
Replies:
Posted By: californiajohnny
Date Posted: 29-July-2016 at 12:47PM
never seen one with 4 or 5 wires, but then i'm not into that newer stuff what year and model honda??? i can check but not up on newer cars they all look the same to me------------- JOHN 74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
Posted By: fordpower
Date Posted: 29-July-2016 at 12:51PM
|
1998 civic fx reg honda has 4 this has 5 thanks. |
Posted By: californiajohnny
Date Posted: 29-July-2016 at 1:10PM
|
hmm, i can check... ------------- JOHN 74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
Posted By: fordpower
Date Posted: 29-July-2016 at 1:20PM
| correction hx |
Posted By: jversch
Date Posted: 29-July-2016 at 2:18PM
|
that sensor may have a heater that uses the extra wires . ------------- Jerry VerSchneider 1972 Gran torino formal roof H Code 1973 Gran torino fast back H code. |
Posted By: jhggtsf
Date Posted: 29-July-2016 at 5:20PM
|
These two were the least expensive I could find on eBay shipping from the US; $65, still not cheap. http://www.ebay.com/itm/152071369345" rel="nofollow - http://www.ebay.com/itm/152071369345 http://www.ebay.com/itm/291709859648" rel="nofollow - http://www.ebay.com/itm/291709859648 If you dig around you can find it a little cheaper shipped from China. It's a wide band, must have been one of the first in production. Didn't know anybody was using them back in '98. BTW, probably should double check the part # just to be sure these would fit.
------------- Joe |
Posted By: fordpower
Date Posted: 30-July-2016 at 1:31AM
| They seem cheep. parts stores 319. yes its something to do with heat sensors.Colors are wrong? Almost worth a try though. thanks |
Posted By: Billy C
Date Posted: 14-September-2016 at 10:26AM
|
the HX is pretty bad ass. It's a very unique car. I'm not surprised the O2 sensor is special. Does yours have the CVT? ------------- -Billy Conturo |
Posted By: fordpower
Date Posted: 15-September-2016 at 12:04AM
| What is a cvt changed ox sensor. Keeps saying evac system problem We have replaced whole system still wont pass. Garage said must be in computer time to retire car I guess. |
Posted By: unlovedford
Date Posted: 15-September-2016 at 2:15AM
|
HX models in that style are pretty highly sought after. They were designed with maximum fuel economy in mind and had quite a few special parts. Even the wheels and some seats were made lighter. Most had 5 speeds, some were 4 speed automatics, all had special gearing to get the best MPG. I'd sell the car to a tuner or someone in a non-emissions county. ------------- Joe 1972 Mom's Squire Wagon 1972 Torino Wagon 1976 Torino 1968 Cougar XR7-First batch 1972 Torino 460 1989 BroncoII/Jeeps/Titanimous Popeye and Brutus (Rams) |
Posted By: jhggtsf
Date Posted: 15-September-2016 at 2:52AM
Do you mean "evap system"? In the Ford system I'm familiar with there is a purge valve, a canister vent valve, a tank pressure sensor, a carbon canister, and then all lines to and from the gas tank in the system. To test the system, the computer closes the vent valve while purging to pull vacuum, shuts off purge, and then checks to see that vacuum is held in the tank. Most common failures on Fords is the gas cap leaking and the canister vent valve stuck open/not sealing. But on an older car you can start getting leaks anywhere. What code are you setting, P0455? ------------- Joe |
fordpower wrote:Posted By: Billy C
Date Posted: 18-September-2016 at 2:49PM
|
I thought the hx had a cvt not automatic ------------- -Billy Conturo |
Posted By: Billy C
Date Posted: 18-September-2016 at 2:52PM
|
post some pics of this car. It's sounds pretty cool. ------------- -Billy Conturo |
Posted By: unlovedford
Date Posted: 21-September-2016 at 9:34AM
|
CVT came out much later. EG and EK Civics just got 5 speeds and the occasional 4 speed auto. I'm biased, but a huge EG fan. ------------- Joe 1972 Mom's Squire Wagon 1972 Torino Wagon 1976 Torino 1968 Cougar XR7-First batch 1972 Torino 460 1989 BroncoII/Jeeps/Titanimous Popeye and Brutus (Rams) |
Posted By: Billy C
Date Posted: 21-September-2016 at 2:45PM
|
Now you have me checking myself. I'm almost positive the HX trim level came with a cvt starting in like 96 or something. ------------- -Billy Conturo |
Posted By: fordpower
Date Posted: 22-September-2016 at 1:33AM
| All I know is its an hx which means everything is expensive. Its not special just a 2dr coup. Vin no says vortec motor. This does not appear to be but honda said not all said vortec there were three versions. It is going by by . |
Posted By: fordpower
Date Posted: 22-September-2016 at 8:27AM
| They found a censer in rear near gas tank that is not responding fast enough .105 if not that I give up. |