Lower control arm "spacers"
Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1970-1971 Ford and Mercury
Forum Description: Technical discussion for 1970-1971 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=16168
Printed Date: 19-April-2024 at 6:39PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Lower control arm "spacers"
Posted By: Heffs
Subject: Lower control arm "spacers"
Date Posted: 24-April-2017 at 4:54AM
|
Hi Recieved new lower control arms Torino 1970 Just wondering where the two "spacers" that came with the kit are supposed to go? Old control arm don't have these Heffa  http://m.ebay.com/itm/Ford-Maverick-1970-1977-Front-Lower-Control-Arm-and-Ball-Joint-10812-/172240804774?hash=item281a5a1ba6%3Ag%3AYe0AAOSwGvhUB71l&_trkparms=pageci%253A690a2fed-2905-11e7-a042-74dbd180e754%257Cparentrq%253Aa0a6077415b0aa12e19da201fffa548d%257Ciid%253A22" rel="nofollow - http://m.ebay.com/itm/Ford-Maverick-1970-1977-Front-Lower-Control-Arm-and-Ball-Joint-10812-/172240804774?hash=item281a5a1ba6%3Ag%3AYe0AAOSwGvhUB71l&_trkparms=pageci%253A690a2fed-2905-11e7-a042-74dbd180e754%257Cparentrq%253Aa0a6077415b0aa12e19da201fffa548d%257Ciid%253A22 ------------- Heffa |
Replies:
Posted By: californiajohnny
Date Posted: 28-April-2017 at 5:01PM
|
IDK, the link didn't work for me? check your new parts against the old ones to see if they are correct if so maybe the spacers are for a different model and aren't needed??? ------------- JOHN 74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
Posted By: Rockatansky
Date Posted: 30-April-2017 at 3:25AM
|
i just did control arms on my daily driver, the new ones came with washers to make up the difference in the length of the bushing sleeve. it may become obvious when you do the install ------------- 72 GT Ute |