Rocker panel trim
Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: Starsky & Hutch
Forum Description: Technical discussion for original and replica S&H Torinos
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=16603
Printed Date: 28-March-2024 at 5:13AM Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Rocker panel trim
Posted By: SCZebra3
Subject: Rocker panel trim
Date Posted: 08-October-2017 at 9:16AM
Hi, just checking to see if anybody has the rocker panel trim pieces for both sides for a 1976 Gran Torino 2 dr. Or any after market universal piece that would work, trying to finish this car, thanks for your help
|
Replies:
Posted By: californiajohnny
Date Posted: 08-October-2017 at 9:55AM
i may have a pair of the rear ones? these are hard to find!! i searched forever to find one for my car....
------------- JOHN 74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION
|
Posted By: foote500
Date Posted: 08-October-2017 at 10:18AM
I've got a set for a ranchero, they would be a little to long, but if you have a good body guy he can shorten them.
------------- Marc German Shepherd Rescue 1967 Ford Fairlane 500, 390
|
Posted By: SCZebra3
Date Posted: 08-October-2017 at 10:53AM
Hi again sir, you don't need them?
|
Posted By: SCZebra3
Date Posted: 08-October-2017 at 10:55AM
Hi, thanks for the response, if they are the same but longer, trust me, I can work with that, what you need for them?
|
Posted By: californiajohnny
Date Posted: 08-October-2017 at 1:53PM
i sent you a PM on the 2dr rear moldings... if marc has the longer under door ones you can shorten them!!!
------------- JOHN 74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION
|
Posted By: foote500
Date Posted: 08-October-2017 at 2:47PM
I have the under door, rocker panel moldings, I was thinking of putting them on my car but I think it might look to busy. PM me and I will e-mail some pictures.
------------- Marc German Shepherd Rescue 1967 Ford Fairlane 500, 390
|
Posted By: SCZebra3
Date Posted: 09-October-2017 at 2:58AM
The ranchero ones I want, I can cut them, let me know
|
Posted By: starsky460
Date Posted: 09-October-2017 at 4:07AM
SCZebra3 wrote:
Hi, just checking to see if anybody has the rocker panel trim pieces for both sides for a 1976 Gran Torino 2 dr. Or any after market universal piece that would work, trying to finish this car, thanks for your help
|
Sent you a PM
------------- Carl 1976 Gran Torino Starsky & Hutch Limited Edition FACTORY 460 c.u. engine 3:55 gears
|
Posted By: foote500
Date Posted: 09-October-2017 at 5:00AM
I am not getting any PM's, send me your e-mail at foote5@yahoo.com.
------------- Marc German Shepherd Rescue 1967 Ford Fairlane 500, 390
|
|