Print Page | Close Window

1973 Gran Torino power seats

Printed From: The Ford Torino Page
Category: General Discussion
Forum Name: How-To Articles
Forum Description: Want to post a "how-to" on something you've done that could help someone else?
URL: http://forum.grantorinosport.org/forum_posts.asp?TID=16785
Printed Date: 23-January-2018 at 3:56AM
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 1973 Gran Torino power seats
Posted By: grandpops4
Subject: 1973 Gran Torino power seats
Date Posted: 06-January-2018 at 11:47AM
How do I wire in power bucket seats using the wiring harness from the seats to the fuse block that never had power seats. Thanks Grandpops4.

-------------
gm



Replies:
Posted By: Power Surge
Date Posted: 06-January-2018 at 12:12PM
Factory power seats shared the same heavy BK/W wire used for power windows and door locks. This wire started at the power side of the starter solenoid, with a circuit breaker, and then ran into the car through the firewall. 

If your car did not come with power seats, windows, or door locks, you won't have that wire. Just run a 10 or 12 gauge wire out through the firewall, along the engine harness, and to the starter solenoid, and put a 30amp circuit breaker on it. 


-------------
Sal Mennella
73 GTS 351 CJ
75 Cougar XR7
73 Ranchero - 5.0 Coyote swap - in progress
Past Torinos - 72 Gran Torino, 75 Gran Torino, 75 Elite


Posted By: grandpops4
Date Posted: 06-January-2018 at 12:44PM
Thanks

-------------
gm



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net