1972-1976 Ford and Mercury - Removing Brake Booster

Print Page | Close Window

Removing Brake Booster - 76 Gran Torino

Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1972-1976 Ford and Mercury
Forum Description: Technical discussion for 1972-1976 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=18033
Printed Date: 19-April-2024 at 7:44AM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: Removing Brake Booster - 76 Gran Torino

Posted By: torinomike650
Subject: Removing Brake Booster - 76 Gran Torino
Date Posted: 08-May-2019 at 8:12AM

I removed the 4 nuts on the inside firewall, does anyone know what kind of clip/bolt/fastener is holding the booster to the brake pedal and how best to remove it?

I am 6'4" and have a hard time getting my head under there to have a good look at it, so anyone with experience removing the booster from these cars that have input, I would greatly appreciate it. Thanks!

-------------
Mike

1974 Ford Gran Torino

Replies:

Posted By: californiajohnny
Date Posted: 08-May-2019 at 4:24PM

mike its a wire clip that slides on through a hole in the center of the pivot shaft, just slide it off and move the booster rod and brake switch to the side and off the pivot shaft

-------------
JOHN
74 GRAN TORINO S&H CLONE
74 VETTE CUSTOM
90 S10 BLAZER 4X4 LIFTED
77 CELICA CUSTOM
75 V8 MONZA SUPERCHARGED
79 COURIER VERT. SLAMMED
75 VEGA V6 5 SPD
70 CHEV C10 P/U
68 MUSTANG FB CONVERSION