|
c-6 shift shaft |
Post Reply 
|
| Author | |
jrocket 
New Member 
Joined: 21-October-2023 Location: whitelaw wi Status: Offline Points: 2 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: c-6 shift shaftPosted: 21-October-2023 at 6:29AM |
|
I will be installing a 428-c6 in my 69 this winter, wondering i anyone has the part number or even a pic of the correct shift shaft for a column shift car?
the shaft in the c-6 I mean. thanks!! |
|
 |
|
|
mdhracing
New Member
Joined: 05-December-2023 Location: INDIANA Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 02-April-2024 at 2:05PM |
|
message me, and i can show you what you need. I have a 69 Talladega, with the set up. I had to source some parts, and had to make some.
mdhracing@aol.com
|
|
|
CMC CHIEF MIKE
|
|
|
|
|
Rosedalenative
New Member
Joined: 14-January-2024 Location: Florida Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 08-October-2024 at 11:54AM |
|
I have a Talladega, trying to replace a leaky oil pan gasket. I know the engine has to be raised a few inches. I removed the 8 bolts holding the two side motor mounts to the frame. I also removed the big nut in the middle of each. Engine doesn’t move. What am I missing?
|
|
|
|
|
mdhracing
New Member
Joined: 05-December-2023 Location: INDIANA Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 10-October-2024 at 2:47PM |
|
Did you remove the motor mounts completely?
If so, you will probably need to take the transmission mount loose. Make sure nothing on the top is in the way. Make sure the fan blade is not hitting the shroud. The oil filter is real close to the sway bar. The exhaust, depending on what kind you have, can hold the engine also. Be careful not to bend the transmission linkage.
|
|
|
CMC CHIEF MIKE
|
|
|
|
|
Post Reply
|
|
| Tweet |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options