REAREND GEARS |
Post Reply |
Author | |
Scott
Senior Member Joined: 31-January-2012 Location: Versailles,Ohio Status: Offline Points: 216 |
Post Options
Thanks(0)
Posted: 02-October-2014 at 1:56AM |
Ok fella's what brand of ring and pinion do you all recommend for a car that has a slightly built 351W with a 4 speed in it? I have dealt with Richmond before and I have seen Mosier Eng. gears out of Indiana. I just wanted some opinions on the matter if anyone has had good or bad experience with these or any others that you may recommend.Thanks,Scott
|
|
72 RS 351
Senior Member Joined: 04-September-2014 Location: Knoxville TN Status: Offline Points: 2767 |
Post Options
Thanks(0)
|
Try to buy Motorcraft gears, they are the top quality choice. Others are harder to set up and more often make noise.
Try to buy a set of used gears, OEM used gears that are not hurt are almost as good as new, and at half the cost typically. Shoot for around $75 for used gears. What ratio are you aiming for? Without an overdrive, I'd stay under about 3.70:1, say 3.50 or less. I have 4.11's now, but plan to go back to 3.50's at least with an overdrive trans. |
|
Don
73 Ranchero "Sport 72 front end", floor shift/console, planning EFI 7000+ rpm 351-4V &4R70W 73 Ranchero GT 351C-4V &4R70W for sale later. 92 Lincoln Mark VII SE GTC, OBDII 347/4R70W |
|
TV 2M8O
Senior Member Joined: 20-September-2006 Location: Southern Ohio Status: Offline Points: 2052 |
Post Options
Thanks(0)
|
I used Yukon Gears from http://www.ringpinion.com/. Very helpful staff! Haven't tried the new ring & pinion yet... car is still under construction.
|
|
TV 2M8O OUT JOE 1976 Gran Torino S&H season 2-4 Clone Project Blog: http://tv2m8o.blogspot.com/ |
|
aquartlow
Senior Member Joined: 19-December-2011 Location: Summerfield, Fl Status: Online Points: 2271 |
Post Options
Thanks(0)
|
X2^^, I have a good friend that owns a 4x4 shop(has helped me many times), he told me he has had very good results with using Yukon gearsets.
|
|
www.supermotors.net/22468
Yeah, It's a Hybrid...It burns gas and tires. No matter how good she looks, somebody, somewhere, is tired of her sh*t. Beauty is skin deep, ugliness goes clear to the bone. |
|
Billy C
Senior Member Joined: 10-February-2010 Location: Pittsburgh, PA Status: Offline Points: 948 |
Post Options
Thanks(0)
|
Used OEM gears are fine as long as they're in good shape.
|
|
-Billy Conturo
|
|
Scott
Senior Member Joined: 31-January-2012 Location: Versailles,Ohio Status: Offline Points: 216 |
Post Options
Thanks(0)
|
3:50 IS WHAT I am looking for. I don't think Motorsport has 1 offered I yhink I will do the Richmond for the price $189.00 Summit
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |