engine hight |
Post Reply |
Author | |
fordpower
Senior Member Joined: 02-September-2010 Location: willseyville,ny Status: Offline Points: 1766 |
Post Options
Thanks(0)
Posted: 14-July-2016 at 5:16AM |
Does the351m set higher in engine comp that 351w or do motor mounts make them the same.
|
|
dave302
Senior Member Joined: 08-October-2009 Location: usa Status: Offline Points: 3171 |
Post Options
Thanks(0)
|
The 351m is 0.794 inches (25/32") taller than the 351w, but i do not know if the motor mounts make them set the same. I will take a guess an say yes, the 351m sets higher in the engine compartment than a 351w.
|
|
Big Bird
Senior Member Joined: 25-August-2013 Location: New York Status: Offline Points: 4194 |
Post Options
Thanks(0)
|
351M is noticeably taller/wider in the engine bay than a 351w.
|
|
"What we do in full frontal view, is more honest than your cleaned-up mind."
Randy 1979 T-Bird 2005 F-150 STX RCSB 4.6, 3.55 LSD How the Heck does a REGULAR CAB SHORTBED weigh over 5200 pounds? |
|
Rockatansky
Senior Member Joined: 30-July-2010 Location: On The Road Status: Offline Points: 6072 |
Post Options
Thanks(0)
|
you would think that the crankshaft center line would be nearly the same for all engines?the deck height of the block is a big factor in how tall the engine looks / is, and the size of the heads adds to that. 351W heads are small, same as 289/302/5.0, while 351M heads are big square blocks almost /if not the same as 429/460 height-wise
approx deck heights; 302 = 8.2" 351C = 9.2" 351W = 9.5" 351M = 10.3" 460 = 10.3" the 351M/400 appears as large as a big block in the chassis
Edited by Rockatansky - 17-July-2016 at 1:53PM |
|
72 GT Ute
|
|
Big Bird
Senior Member Joined: 25-August-2013 Location: New York Status: Offline Points: 4194 |
Post Options
Thanks(0)
|
Crankshaft Centerline should be in the same place to keep transmission angle consistent, which keeps driveshaft angle consistent, which keeps u-joints in step with each other, and pinion angle...etc....
|
|
"What we do in full frontal view, is more honest than your cleaned-up mind."
Randy 1979 T-Bird 2005 F-150 STX RCSB 4.6, 3.55 LSD How the Heck does a REGULAR CAB SHORTBED weigh over 5200 pounds? |
|
Regul8r 2
Admin Group Joined: 02-February-2016 Location: Rapid City, SD Status: Offline Points: 447 |
Post Options
Thanks(0)
|
Also the fan center line is the same as the shroud is the same for all the cars too.
|
|
Carl, Member/Admin since 07. Still the same admin/moderator REGUL8R just needed a 2nd account for more picture space.
Owner- www.CaNDeCustoms.com |
|
Rockatansky
Senior Member Joined: 30-July-2010 Location: On The Road Status: Offline Points: 6072 |
Post Options
Thanks(0)
|
IIRC there are 2 different shrouds to cover all engines
|
|
72 GT Ute
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |