69 Torino GT-FMX to AOD Swap Question |
Post Reply |
Author | |
Elreydlm
New Member Joined: 01-May-2020 Location: Dallas, TX Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 10-June-2020 at 10:34AM |
I want to swap out my FMX for an AOD transmission on my 69 Torino Fastback with a 351W. Does anybody know if this will be a direct fit or if I have to make crossmember/flexplate/starter/Kickdown Linkage/Driveshaft Adjustments and if so, can anyone point me in the right direction? Thanks..Any help is appreciated. Ramon
|
|
rec
|
|
Big Bird
Senior Member Joined: 25-August-2013 Location: New York Status: Offline Points: 4194 |
Post Options
Thanks(1)
|
Flexplate and starter should be good. Kickdown goes away, AOD uses a TV cable. Driveshaft YOKE should fit, ask California Johnny about length, Crossmember and trans mount.
|
|
"What we do in full frontal view, is more honest than your cleaned-up mind."
Randy 1979 T-Bird 2005 F-150 STX RCSB 4.6, 3.55 LSD How the Heck does a REGULAR CAB SHORTBED weigh over 5200 pounds? |
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(1)
|
same trans mount, starter, flexplate, just need to use the aod yoke it will fit on your drivline u-joint and set up a lokar cable with correct pressure setting!!! almost a direct swap
|
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
Elreydlm
New Member Joined: 01-May-2020 Location: Dallas, TX Status: Offline Points: 6 |
Post Options
Thanks(0)
|
That's good news. Thank you. Just need to figure out (when I get there) how to set the correct pressure setting. I've heard of transmissions burning up if it's not set right. I will get a Lokar TV cable as well. I'm pulling an AOD off an 85 F-150 with a 5.0 from a local boneyard. Any suggestions on a rebuild kit for the AOD? Ramon
|
|
rec
|
|
californiajohnny
Moderator Group Joined: 05-October-2013 Location: winlock, wa Status: Offline Points: 14609 |
Post Options
Thanks(1)
|
i had mine rebuilt by a buddy that owns a local shop. the lokar cable will come with directions on the location of the pressure port to remove the plug, you can use an oil pressure gauge with the long hose to lay the gauge up on the intake so you can read it while making the adjustments it should also come with the gap tool to set the pressure and how to do it...
|
|
JOHN
74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |