Sand blast cabinet question
Printed From: The Ford Torino Page
Category: General Discussion
Forum Name: Tools & Shop Equipment
Forum Description: Tool and shop discussion
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=10963
Printed Date: 22-March-2023 at 6:18AM
Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com
Topic: Sand blast cabinet question
Posted By: TV 2M8O
Subject: Sand blast cabinet question
Date Posted: 05-June-2014 at 1:37PM
OK gents, I have a nutty question for all those with a sand blasting cabinet...The cabinet we got from Jeg's (which is a POS I might add!) has two ports that I'm assuming is an Intake and Exhaust/Vacuum port. The larger of the two is on the back right end of the cabinet and has a chimney on the inside. The smaller port is on the left end of the cabinet and opens directly into the cabinet. Both have a pop off covers to open and close them to the outside.First, is my assumption correct and second, which is intake and which is exhaust?  THANKS!! -------------  TV 2M8O OUT JOE 1976 Gran Torino S&H season 2-4 Clone Project Blog: http://tv2m8o.blogspot.com/ |
Replies:
Posted By: wideone
Date Posted: 05-June-2014 at 3:21PM
|
I have a cheap ass one from HF. The exhaust has a filter to keep the vac from sucking the media out. I don't see the purpose of an intake since you are feed compressed air in to begin with. I say use either one for your exhaust and leave the other closed. BLAST OFF!
|