1968-1969 Ford and Mercury - interchange help

Print Page | Close Window

interchange help

Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1968-1969 Ford and Mercury
Forum Description: Technical discussion for 1968-1969 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=1235
Printed Date: 26-March-2026 at 3:54PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: interchange help

Posted By: 69fastford
Subject: interchange help
Date Posted: 25-October-2007 at 12:51PM

i have a 1970 mustang with disk brakes and a 9 inch rear.will any of this stuff work on my 69 fairlane? any help would be appreciated. thanks mark

Replies:

Posted By: erics69cobra
Date Posted: 23-December-2007 at 12:55PM

Hi Mark, I don't know if you found any help yet but many parts will interchange. If you still need help with this email me with what parts you want to know if they will work my email address is mailto:ericd4027@yahoo.com - ericd4027@yahoo.com

ERIC

Posted By: stuck
Date Posted: 23-December-2007 at 3:45PM

check your tie rods compare the size of the nut the 70 mustang had larger tie rod/hole in spindle.if you can swap nuts you can swap spindles presto disc brakes.for the 9 compare ujoint size or drive shaft lengths , measure guide pin hole center of u bolts.on your back looking up.if you need help holding measuring device remember theres a dumb guy end and smart guy end.can i have your leftovers.

-------------
michigan