1968-1969 Ford and Mercury - 69 torino cj engine mounts

Print Page | Close Window

69 torino cj engine mounts

Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1968-1969 Ford and Mercury
Forum Description: Technical discussion for 1968-1969 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=15963
Printed Date: 26-March-2026 at 3:56PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: 69 torino cj engine mounts

Posted By: dutchtorino
Subject: 69 torino cj engine mounts
Date Posted: 11-February-2017 at 1:34AM

hello all!!

i'm new on this forum, i'm currently working on a 69 torino q code car.

Sadly the 428 is not in the car anymore, i now have a 390 to play with untill i find a 428.

Only problem is: the engine mounts are missing :(

I live in the netherlands so its hard to find them here, and now i want to make them myself, so could anyone be so friendly to post pics with measurements?

Or give me the distance between the oil pan and the frame of the car, and the distance from the firewall to the engine? so i now i have the right position of the engine

Pics are coming soon :)

Replies:

Posted By: jedclampit
Date Posted: 19-April-2017 at 5:27PM

https://www.rockauto.com/" rel="nofollow - https://www.rockauto.com/

Look them up, VERY cheap, pics available too!

Posted By: Nuggets
Date Posted: 19-April-2017 at 11:04PM

If you want to make your own, bolt the trans in first then bolt engine to trans and lower the engine......should have about 1" clearance between pan and crossmember

In fact there might even be a set on ebay uk from memory

-------------
Barnaby

429 powered 73 Stripper.....no comfort, just noise!