How to cut the floor out of a donor Montego
Printed From: The Ford Torino Page
Category: General Discussion
Forum Name: Auto Body Forum
Forum Description: Discussion of anything related to body, paint and metal work/restoration
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=19027
Printed Date: 01-December-2023 at 11:42PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: How to cut the floor out of a donor Montego
Posted By: fordismyboss
Subject: How to cut the floor out of a donor Montego
Date Posted: 06-August-2020 at 4:23AM
|
I've got a pristine passenger compartment floor in a '73 donor Montego. I DO NOT have a project car for the floor so I'm simply saving a much as possible not knowing what I might need later. I've never removed a floor before and currently plan to do the following: 1. Remove the entire floor saving as much material as possible yet allowing the part to fall below the body once cut free. I don't know yet if this is possible.  2. Plan to use a sawzall, with an angle grinder at the ready. 3. Plan to find a cut line high up along the sides but inside the line of the frame so it can drop clear. Any words of wisdom are much appreciated!!!
|
Replies:
Posted By: fordismyboss
Date Posted: 06-August-2020 at 4:10PM
|
No body likes posts without images....   |
Posted By: californiajohnny
Date Posted: 06-August-2020 at 4:52PM
cut along the top edge of the rockers between the seatbelt bracket and edge of the seat brace edge, the corners can be a pain due to multi layers coming together...
------------- JOHN 74 GRAN TORINO S&H CLONE 74 VETTE CUSTOM 90 S10 BLAZER 4X4 LIFTED 77 CELICA CUSTOM 75 V8 MONZA SUPERCHARGED 79 COURIER VERT. SLAMMED 75 VEGA V6 5 SPD 70 CHEV C10 P/U 68 MUSTANG FB CONVERSION |