Print Page | Close Window

WANT TO BUY FORD GENUINE 351 CLEVELAND WATER PUMP

Printed From: The Ford Torino Page
Category: Classified Section
Forum Name: Parts Wanted
Forum Description: Looking for parts? Post your want ad here
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=20169
Printed Date: 27-March-2024 at 8:43PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: WANT TO BUY FORD GENUINE 351 CLEVELAND WATER PUMP
Posted By: boss429429
Subject: WANT TO BUY FORD GENUINE 351 CLEVELAND WATER PUMP
Date Posted: 10-May-2022 at 12:43AM
WANTING TO BUY -
Genuine and original Ford 351 Cleveland water pump DOOE-D dated OC01 through to OK01 so anything dated march 1970 though to september 1970
please PM me if you have one for sale for sale
thanks



Replies:
Posted By: 72 RS 351
Date Posted: 10-May-2022 at 1:11AM
I saw a Cleveland WP on eBay a while back, I think it was listed as new. I pass by that stuff a lot since it's a part with rubber or seals that wear out over time. Any original WP would likely not work, I hope you have plans to rebuild it.


-------------
Don
73 Ranchero "Sport 72 front end", floor shift/console, planning EFI 7000+ rpm 351-4V &4R70W
73 Ranchero GT 351C-4V &4R70W for sale later.
92 Lincoln Mark VII SE GTC, OBDII 347/4R70W


Posted By: boss429429
Date Posted: 16-July-2022 at 2:27PM
Still looking for 351 cleveland water pump thanks 


Posted By: 72 RS 351
Date Posted: 16-July-2022 at 4:38PM
That reminds me, I have a new Cleveland balancer I bought in the mid 1980's. Do you need one of those, this one I have is someplace among my old stuff, in a Ford box?


-------------
Don
73 Ranchero "Sport 72 front end", floor shift/console, planning EFI 7000+ rpm 351-4V &4R70W
73 Ranchero GT 351C-4V &4R70W for sale later.
92 Lincoln Mark VII SE GTC, OBDII 347/4R70W


Posted By: dan0R30
Date Posted: 17-July-2022 at 2:31AM
I missed this post the first time around. I thought for sure I could hook you up since I'm not using the original water pump on my M code rebuild, but now that I looked it had been replaced by the PO with a 1973 July production... Sorry! 

-------------
Dan

1970 Ford Torino hardtop - 351C 4V - FMX - 9" 3.89 TrueTrac


Posted By: boss429429
Date Posted: 19-July-2022 at 12:59PM
Hi can you tell me the part number on the balancer 
thanks


Posted By: 72 RS 351
Date Posted: 19-July-2022 at 1:31PM
I'll see if I can find the box, that should be in one of many larger boxes buried in my spare bedroom.


-------------
Don
73 Ranchero "Sport 72 front end", floor shift/console, planning EFI 7000+ rpm 351-4V &4R70W
73 Ranchero GT 351C-4V &4R70W for sale later.
92 Lincoln Mark VII SE GTC, OBDII 347/4R70W


Posted By: boss429429
Date Posted: 21-August-2022 at 8:46PM
WANTING TO BUY -
Genuine and original Ford 351 Cleveland water pump DOOE-D dated OC01 through to OK01 so anything dated march 1970 though to september 1970
please PM me if you for sale
thanks


Posted By: boss429429
Date Posted: 03-January-2023 at 6:30PM
still looking


Posted By: rcougarman
Date Posted: 09-January-2023 at 10:30AM
I might have one, but unsure of date code.  The casting number matches, but the only date code I have found is directly below it and is an upside down "51" I believe.  
This came from a 71 Mustang 351C-2V.  The bearings seem fine and no evidence of a leak, but I haven't ran it with coolant.  


-------------
Randy



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net