Left front fender support brace.
Printed From: The Ford Torino Page
Category: Classified Section
Forum Name: Parts Wanted
Forum Description: Looking for parts? Post your want ad here
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=20572
Printed Date: 26-March-2026 at 3:55PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Left front fender support brace.
Posted By: Anderslober
Subject: Left front fender support brace.
Date Posted: 23-January-2023 at 9:45PM
|
Hello forum. I need a left front fender support for my 72 GTS. It looks like an elongated ‘z’. It supports the fender to the radiator support. Thanks.
|
Replies:
Posted By: Anderslober
Date Posted: 26-January-2023 at 10:15PM
| Nobody..?😳 |
Posted By: handsofstone
Date Posted: 27-January-2023 at 12:16AM
| Paging @hogfiddles... |
Posted By: hogfiddles
Date Posted: 27-January-2023 at 9:57AM
 This one? Seems to me that it’s going to cost a fortune to mail...... would you be able to make one based on measurements?Dfox
------------- 1973 Gran Torino Sport - Q code “Q-Clone” project-on-hold 1972 Gran Torino Sport - Q code new project 1972 Gran Torino - parts 1969 Torino GT - M code 100+ mid-80's Yamaha XJ-Series (14 trophies) |
Posted By: 72 RS 351
Date Posted: 27-January-2023 at 2:43PM
|
Ah, those rods I remember. A pair would weigh under a pound, and they are I think less than a foot long. I bet they could be made with a solid steel rod by a decent metal worker with an anvil and a way to heat it, plus a drill of course. ------------- Don 73 Ranchero "Sport 72 front end", floor shift/console, planning EFI 7000 rpm 351 stroker 73 Ranchero GT 351C-4V &4R70W for sale later. 92 Lincoln Mark VII SE GTC, OBDII 347/4R70W |
Posted By: hogfiddles
Date Posted: 27-January-2023 at 3:48PM
That’s what I’m thinking…… ------------- 1973 Gran Torino Sport - Q code “Q-Clone” project-on-hold 1972 Gran Torino Sport - Q code new project 1972 Gran Torino - parts 1969 Torino GT - M code 100+ mid-80's Yamaha XJ-Series (14 trophies) |
72 RS 351 wrote:Posted By: Anderslober
Date Posted: 28-January-2023 at 9:33PM
|
Hogfiddles……yes, the picture depicts the rear supprt brace. I need the front support brace. There are two support braces on each fender….see picture..  |