Print Page | Close Window

Extended wheel studs 71 Drums

Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1970-1971 Ford and Mercury
Forum Description: Technical discussion for 1970-1971 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=21150
Printed Date: 26-March-2026 at 3:54PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Extended wheel studs 71 Drums
Posted By: Wubbington
Subject: Extended wheel studs 71 Drums
Date Posted: 20-February-2024 at 2:53PM
Hey all,

Does anyone know where I can find some extended wheels studs that will fit factory drums front and back? can't find anything with the right knurl diameter.


-------------
Stuart

71 Green Formal Roof 302



Replies:
Posted By: Rockatansky
Date Posted: 21-February-2024 at 12:43PM
Rockauto shows some info you might use to source what you need, they give stock length PN's here

https://www.rockauto.com/en/catalog/ford,1971,torino,5.0l+302cid+v8,1141063,wheel,lug+stud,7680" rel="nofollow - https://www.rockauto.com/en/catalog/ford,1971,torino,5.0l+302cid+v8,1141063,wheel,lug+stud,7680

then the knurl sizes are in the Dorman descriptions here,

https://www.dormanproducts.com/p-24324-610-085.aspxwww.dormanproducts.com/p-22260-610-109.aspx" rel="nofollow - https://www.dormanproducts.com/p-24324-610-085.aspx
https://www.dormanproducts.com/p-24324-610-085.aspxwww.dormanproducts.com/p-22260-610-109.aspx" rel="nofollow -
https://www.dormanproducts.com/p-24324-610-085.aspxwww.dormanproducts.com/p-22260-610-109.aspx" rel="nofollow - https://www.dormanproducts.com/p-22260-610-109.aspx




-------------
72 GT Ute
   


Posted By: Wubbington
Date Posted: 22-February-2024 at 2:20AM
Originally posted by Rockatansky Rockatansky wrote:

Rockauto shows some info you might use to source what you need, they give stock length PN's here

https://www.rockauto.com/en/catalog/ford,1971,torino,5.0l+302cid+v8,1141063,wheel,lug+stud,7680" rel="nofollow - https://www.rockauto.com/en/catalog/ford,1971,torino,5.0l+302cid+v8,1141063,wheel,lug+stud,7680

then the knurl sizes are in the Dorman descriptions here,

https://www.dormanproducts.com/p-24324-610-085.aspxwww.dormanproducts.com/p-22260-610-109.aspx" rel="nofollow - https://www.dormanproducts.com/p-24324-610-085.aspx
https://www.dormanproducts.com/p-24324-610-085.aspxwww.dormanproducts.com/p-22260-610-109.aspx" rel="nofollow -
https://www.dormanproducts.com/p-24324-610-085.aspxwww.dormanproducts.com/p-22260-610-109.aspx" rel="nofollow - https://www.dormanproducts.com/p-22260-610-109.aspx




Thanks for response!

Yeah i have the specs but was just curious if anyone else has run them. Never messed with studs but my understanding is you can run a stud up to .016 larger than stock and it should still work?


-------------
Stuart

71 Green Formal Roof 302



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net