Auto column shift linkage, C4 Ranchero/Torino
Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1970-1971 Ford and Mercury
Forum Description: Technical discussion for 1970-1971 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=21214
Printed Date: 26-March-2026 at 5:43PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Auto column shift linkage, C4 Ranchero/Torino
Posted By: Bahn
Subject: Auto column shift linkage, C4 Ranchero/Torino
Date Posted: 09-April-2024 at 7:20PM
|
So I have some linkage that came with the car, and there were no bushings. It looks like it needs three, and I managed to get two, but there's one more that doesn't look like the others. I have found nothing about this piece and was wondering if someone ran into this issue before, not sure if its necessary or how i would get it on but there must be a way, right? Some ebay listing (bushing circled in blue)  My part:  |
Replies:
Posted By: dan0R30
Date Posted: 12-April-2024 at 11:29AM
|
I had no luck finding any for my linkage either. Rather than buying a bunch for other vehicles at an upcharge, I went to Menards and grabbed a few generics until I found some that worked. Shifts just fine now. ------------- Dan 1970 Ford Torino hardtop - 351C 4V - FMX - 9" 3.89 TrueTrac |