front turn sig lens
Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1977-1979 Ford and Mercury
Forum Description: Technical discussion for 1977-1979 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=21278
Printed Date: 26-March-2026 at 10:33AM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: front turn sig lens
Posted By: fordpower
Subject: front turn sig lens
Date Posted: 31-May-2024 at 3:35AM
| what is the best glue to fasten front sig lens ltd2 back on housing. |
Replies:
Posted By: aquartlow
Date Posted: 31-May-2024 at 4:13AM
Epoxy, this is what I've used, self mixing tip makes it easy to apply. I did this to both of mine after cleaning and spraying the inside with "chrome" paint for more reflectivity-made quite a difference. I tried using plastic glue on an almost perfect PS turn signal assembly, the lens didn't make it back home from one 20 minute trip, I "learnt" my lesson. Used the JB Weld and they've been in use for over 12 years without an issue. Hope this helps. ------------- www.supermotors.net/22468 Yeah, It's a Hybrid...It burns gas and tires. No matter how good she looks, somebody, somewhere, is tired of her sh*t. Beauty is skin deep, ugliness goes clear to the bone. |
Posted By: fordpower
Date Posted: 31-May-2024 at 10:49AM
| Ok I will try it. I have 3 or four I thought I would clean up. Have you seen what people are asking for these. |
Posted By: aquartlow
Date Posted: 31-May-2024 at 2:01PM
|
Oh yeah, crazy money for sure. I have 2 extra sets, not selling unless I sell my Ranchero ------------- www.supermotors.net/22468 Yeah, It's a Hybrid...It burns gas and tires. No matter how good she looks, somebody, somewhere, is tired of her sh*t. Beauty is skin deep, ugliness goes clear to the bone. |