Print Page | Close Window

NOS 72 LH Driver's door skin on shell

Printed From: The Ford Torino Page
Category: Classified Section
Forum Name: Parts for Sale
Forum Description: Parts for sale only. No eBay/Craiglist listings
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=21618
Printed Date: 26-March-2026 at 9:20AM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: NOS 72 LH Driver's door skin on shell
Posted By: Eliteman76
Subject: NOS 72 LH Driver's door skin on shell
Date Posted: 05-March-2025 at 6:14PM
Selling my NOS driver's door skin and also have NOS left (driver's door skin) welded on a door that was patched back together. 
 
NOS LH Skin UPDATE: SOLD and heading to Denmark!
NOS LF skin welded to door shell, still for sale as of 6-26-2025.

Sold the RH Passenger skin I got yesterday so I have decided to sell the LH skin I have been holding on to for about a year.

Asking $500 for the door skin. 

If you live within a 2-3 hour drive of me, I will be willing to drive and meet part way if you live close to NE Kansas. I am 2 hours south of Omaha, Nebraska, or 1.5 hours NW of Kansas City, MO.

















-------------
Andrew:GTS.ORG admin, '72 Q code 5 speed Restomod
Pondering: #99Problems



Replies:
Posted By: JT46
Date Posted: 08-April-2025 at 1:52PM
I have a 72 Gran Torino sport roof will that work for mine ? Not a body guy but my corners on driver side a passenger side are ate up always been garaged kept but Midwest weather, was my fathers original owner besides dealer. 


Posted By: Eliteman76
Date Posted: 08-April-2025 at 3:48PM
Evening JT, yes this skin is for a 2 door, 72-76 door shell. Will work for Torino or Ranchero doors. If you have a sports roof, this will be the door skin you need. 

Any questions, please feel free to ask away. 

Overall on the door skin, you have a couple options, You can section what you need, or do the entire door skin. 

Keep in mind, when you see rust, if it's a dine size bubble, odds are there is a dollar coin size rust on the backside of the skin. 

If you skin the door, it's honestly not that hard, but the door needs to be off the car for full access. Replacing the skin overall, I've found fastest to take a 36 grit flap wheel on a 4.5" grinder, grind off the skin edge, and then you use a grinding wheel, or a small dynamite /milwaukee belt sander that uses a narrow 3/8" or 1/2" wide 24-36 grit belt and grind the welds down. Amazon sells a Lisle brand panel chisel for breaking spot welds after grinding the spot welds for the old door skin spot welds. 

Main thing is take your time, position the new skin on the shell and hammer and dolly the lips over, and spot weld every couple inches on the edge like the factory. 



-------------
Andrew:GTS.ORG admin, '72 Q code 5 speed Restomod
Pondering: #99Problems


Posted By: Eliteman76
Date Posted: 08-April-2025 at 5:23PM
Panel spot weld tool: 
https://a.co/d/ge6blRg" rel="nofollow - https://a.co/d/ge6blRg

Eastwood manual door skin install tool video 


skin install tool:  https://www.eastwood.com/eastwood-door-skin-installation-tool.html?utm_source=youtube+&utm_medium=annotation+&utm_campaign=2021-09-28&utm_content=door+skinning+tool+product+video+" rel="nofollow - https://www.eastwood.com/eastwood-door-skin-installation-tool.html?utm_source=youtube+&utm_medium=annotation+&utm_campaign=2021-09-28&utm_content=door+skinning+tool+product+video+

Deboss Garage doorskin replacement on GTO door: 




-------------
Andrew:GTS.ORG admin, '72 Q code 5 speed Restomod
Pondering: #99Problems


Posted By: Eliteman76
Date Posted: 12-April-2025 at 7:14AM
Door skin is pending sale as of today. Heading to Denmark. 

JT, if you need a skin to use for patch panels, I have another door skin that is welded to a door shell I can cut off and section down for easier shipping. 


-------------
Andrew:GTS.ORG admin, '72 Q code 5 speed Restomod
Pondering: #99Problems


Posted By: Eliteman76
Date Posted: 12-April-2025 at 7:20AM


-------------
Andrew:GTS.ORG admin, '72 Q code 5 speed Restomod
Pondering: #99Problems


Posted By: Eliteman76
Date Posted: 12-April-2025 at 7:21AM



This NOS skin was installed on a rough door shell that was fixed on the bottom. 

I am planning on sectioning the skin off this door, if someone needs a patch section. 
I may end up keeping the rear corner section but you could use the front and center sections of the skin to patch what you need. 










-------------
Andrew:GTS.ORG admin, '72 Q code 5 speed Restomod
Pondering: #99Problems


Posted By: 72 RS 351
Date Posted: 12-April-2025 at 8:06AM
Well done Andrew, for taking the time to pack that skin and ship it to Denmark. Very nice.

-------------
Don
73 Ranchero "Sport 72 front end", floor shift/console, planning EFI 7000 rpm 351 stroker
73 Ranchero GT 351C-4V &4R70W for sale later.
92 Lincoln Mark VII SE GTC, OBDII 347/4R70W


Posted By: Eliteman76
Date Posted: 26-June-2025 at 3:00PM
Bump: I still have the door with the NOS skin on it as of today, 6-26-2025



-------------
Andrew:GTS.ORG admin, '72 Q code 5 speed Restomod
Pondering: #99Problems



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net