Master Brake Cylinder
Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1968-1969 Ford and Mercury
Forum Description: Technical discussion for 1968-1969 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=2592
Printed Date: 26-March-2026 at 3:54PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Master Brake Cylinder
Posted By: Mayor2020
Subject: Master Brake Cylinder
Date Posted: 27-September-2009 at 3:15PM
I have an 1968 Ford Torino, I have a old master brake cylinder that was leaking at the top of the seal, so I knew, I had to repace the calipers on the front with new disc bakes., due to leaking at the calipers. I also replaced the leaking wheel cylinders on the rear brakes. I put in a new master brake cylinder, and the cylinder seem to be still leaking at the top of the gasket. How do I go about fixing this problem. HELP.....
|
Replies:
Posted By: Mayor2020
Date Posted: 04-October-2009 at 3:20PM
| I have tried bending the metal clip that goes over the top. This helped a little, but still leaking brake fluid from the top seal.. |