Print Page | Close Window

1970 Torino Cobra 429

Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1970-1971 Ford and Mercury
Forum Description: Technical discussion for 1970-1971 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=386
Printed Date: 26-March-2026 at 1:25PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: 1970 Torino Cobra 429
Posted By: Dave
Subject: 1970 Torino Cobra 429
Date Posted: 30-August-2005 at 3:28PM
I just came a cross a 1970 Ford Torino Cobra 429 with a Shaker Hood. The guy selling it says it is all original and all numbers matching. Being new to this kind of stuff, I have no real idea on how to verify this. All I have is the vin#OR38J127170. How do you tell if this has the original engine & trani? I have asked for engine casting#? but the seller doesnt know where to look?! Can someone steer me on where to look for these numbers?



Replies:
Posted By: JimW
Date Posted: 31-August-2005 at 2:58AM

J is a 429 as far as I remember, and I think it might be a CJ as well.

Go here:

http://www.network54.com/Forum/198944 - http://www.network54.com/Forum/198944

 

They know anything and everything about them..

Jim



-------------
1976 S&H Gran Torino

460/C6/4.33 13.05@105.6

545/C6/3.56 11.52@117.8

460/T56/4.00 cruiser

www.torinocobra.com
www.starskytorino.com
https://www.hotrod.com/features/0702phr-1971-ford-gran-torino/


Posted By: GranTorinoSport
Date Posted: 31-August-2005 at 4:39AM

http://grantorinosport.org/70torino06.htm#engine - http://grantorinosport.org/70torino06.htm#engine

Now that I have all of the old Ford Torino Page files copied over to the new server, the information about engine codes for 1970 is there.

Jim was right, 429 4-V "Cobra Jet Ram Air"



-------------
Scott Eklund

Webmaster


Posted By: Dave
Date Posted: 31-August-2005 at 5:30PM

Thank you- From what I can tell, and it is quite hard to see these dang numbers- the block has a "460" above the water pump- so I would assume that this is not the original block- but, the heads match the 429?! Anyway, doesn't make much difference, I love the car- pretty fast too! Now- to replace the trani sea l- wish me luck!

Dave



Posted By: JimW
Date Posted: 01-September-2005 at 2:09AM

What is the casting # on the heads?  (near the exhaust ports)  should be D0OR or the like

(Not anything with -VE at the end like C8VE, C9VE, D0VE, D2VE D3VE)

There are other signs as well..  But a J code Cobra is a good find, even if you have to locate a motor.... 

Are you familiar with the Ford casting date scheme?

ie C9 = 1969, D0 = 1970, D1 = 1971, etc?

Jim 

 

 



-------------
1976 S&H Gran Torino

460/C6/4.33 13.05@105.6

545/C6/3.56 11.52@117.8

460/T56/4.00 cruiser

www.torinocobra.com
www.starskytorino.com
https://www.hotrod.com/features/0702phr-1971-ford-gran-torino/



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net