Print Page | Close Window

Hmmm, rather peculiar 400

Printed From: The Ford Torino Page
Category: Powertrain Specific Forum
Forum Name: 335 Series Engine Forum
Forum Description: 351C, 351M and 400 engines
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=3960
Printed Date: 26-March-2026 at 2:21PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Hmmm, rather peculiar 400
Posted By: torkair
Subject: Hmmm, rather peculiar 400
Date Posted: 12-July-2010 at 7:02PM
While unloading my 400 from my buddy's truck today I noticed that there were cast on provisions for small block motor mounts.  They weren't drilled or threaded or anything just blank bosses, I'll take some pics tomorrow when I start cleaning it up and putting the new parts in.

-------------
72 Gran Torino "sport"- in progress

73 Ranchero GT- Q code-460/C6/3.25 open rear



Replies:
Posted By: Skinnys Garage
Date Posted: 12-July-2010 at 7:35PM
You might want to check the back to see if it's one of the "dual bell" versions. Both small block and regular 400 (429-460 style) pattern on the same block. I think they were early production, I've only seen one. 


Posted By: torkair
Date Posted: 13-July-2010 at 6:16AM
I checked and it's only got the double pattern mounts, would have been hard pressed to keep it if it was double pattern all across as those blocks are worth a fair bit of torino$$$$.  Dissassembly, cleaning, and reassembly pics to follow over the next couple days :)

-------------
72 Gran Torino "sport"- in progress

73 Ranchero GT- Q code-460/C6/3.25 open rear


Posted By: Rockatansky
Date Posted: 01-August-2010 at 6:28PM
are the 2nd set of mounts complete or is there a bolt boss missing like the FMX dual bell pattern blocks?
 
 
it's the rear boss on the oil filter side that missing, there's a boss close but in the wrong place


Posted By: torkair
Date Posted: 01-August-2010 at 7:49PM
Yep, thats pretty much what I've got

-------------
72 Gran Torino "sport"- in progress

73 Ranchero GT- Q code-460/C6/3.25 open rear


Posted By: Blue71GT
Date Posted: 06-February-2011 at 6:18PM
I thought you could drill and tap those for windsor mounts but I guess not.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net