B&M Shifter
Printed From: The Ford Torino Page
Category: Powertrain Specific Forum
Forum Name: Transmissions
Forum Description: For discussion relating to all Ford Transmissions
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=505
Printed Date: 23-April-2024 at 2:44AM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: B&M Shifter
Posted By: Psquare75
Subject: B&M Shifter
Date Posted: 16-February-2006 at 4:45AM
|
B&M Shifter... fit nicely where the stock floor shifter would have gone (had this car had one). I need to raise it up slightly.. it's a little low for me right now. The boot will take up any distance when I raise it.. I have a few inches to play with. Next up.. eBay left over stuff. Then comes 13" front discs.
------------- Paul 77 XR7 460/C6/3.00:1 *SOLD* 78 XR7 523/C6/3.5:1 79 F100 460/TKO500/3.25:1 'I also have some left over potatoes-I understand you can generate electricity from them'- Foote500 |
Replies:
Posted By: GranTorinoSport
Date Posted: 17-February-2006 at 6:45AM
|
Did you see the article in Ford Muscle Magazine about a floor shifter upgrade? I will post it up here next week. Did you have to change the shift lever on the transmission? I know when you go from factory column to floor shift you have to change it, and finding them for a C6 is damn near impossible (I have the whole shifter kit for factory shift but no C6 shift lever). It looks very, very nice! ------------- Scott Eklund Webmaster |
Posted By: Psquare75
Date Posted: 17-February-2006 at 6:47AM
|
The B&M has you simply cut off the ford arm on the C6, and they have a small lever that clamps onto the remaining material. Works fine. ------------- Paul 77 XR7 460/C6/3.00:1 *SOLD* 78 XR7 523/C6/3.5:1 79 F100 460/TKO500/3.25:1 'I also have some left over potatoes-I understand you can generate electricity from them'- Foote500 |