FMX to C4 swap
Printed From: The Ford Torino Page
Category: Powertrain Specific Forum
Forum Name: Transmissions
Forum Description: For discussion relating to all Ford Transmissions
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=529
Printed Date: 20-April-2024 at 2:26AM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: FMX to C4 swap
Posted By: corder13
Subject: FMX to C4 swap
Date Posted: 12-March-2006 at 12:21AM
|
I read somewhere on the Ford Transmission Forum that the crossmember for a C4 is different than the one for an FMX. Does anyone know for sure if that is correct for our cars? I already have a built C4 to go in the car, and the shop up the road will do it. However, I'd like to make sure that all the pieces they need will be there when they do it, so I can get it licensed immediately afterwards. Also, I read on the same forum that the driveline length was not a problem, so I'm guessing they're fairly similar in length as well? Rick |
Replies:
Posted By: Torinogts73c
Date Posted: 12-March-2006 at 2:29AM
|
The X-member is the same no matter what trans, however the trans mount is different for the C-4 so go to your auto supply and get one for a C-4. Gary ------------- Gary 73 Gran Torino Sport 351CJ,17 Mustang Ecoboost,15 Jeep Grand Cherokee LTD, Ford Ranger parts hauler "Never complain Never explain" Henry Ford |
Posted By: corder13
Date Posted: 12-March-2006 at 8:59AM
|
Gary, Thanks for the reply. Any idea if the trannies are actually the same length? Rick |
Posted By: Torinogts73c
Date Posted: 13-March-2006 at 12:45AM
|
The C-4 uses a shorter a shorter drive shaft a believe about an inch. C-4 has 28 spline yoke FMX is 31 spline ------------- Gary 73 Gran Torino Sport 351CJ,17 Mustang Ecoboost,15 Jeep Grand Cherokee LTD, Ford Ranger parts hauler "Never complain Never explain" Henry Ford |
Posted By: corder13
Date Posted: 13-March-2006 at 9:01AM
Ok, thanks! Now all I need to do is find a yoke. My grandfather said he'd take care of the driveshaft for me.  Rick |