Print Page | Close Window

FLOOR SHIFTER

Printed From: The Ford Torino Page
Category: Powertrain Specific Forum
Forum Name: Transmissions
Forum Description: For discussion relating to all Ford Transmissions
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=724
Printed Date: 17-August-2022 at 3:31AM
Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com


Topic: FLOOR SHIFTER
Posted By: tjbooker
Subject: FLOOR SHIFTER
Date Posted: 09-August-2006 at 11:59AM
HELP, DO ANY OF YOU GUYS KNOW,
IM CONVERTING MY 74 TORINO FROM COLUMN SHIFT TO FLOOR SHIFT,
I HAVE A SHIFTER AND THE FMX SHIFTER ROD. I READ SOMEWHERE THAT A SHIFTER ARM IS ALSO NEEDED BESIDES THE ROD AND SHIFTER BECAUSE THE
SHIFTER ARMS ARE DIFFERENT THAN ON COLUMN SHIFTERS. ANYONE KNOW?
THANKS TJ



Replies:
Posted By: Torinogts73c
Date Posted: 10-August-2006 at 1:00AM
Yes you need to change the shift lever on the trans. as well as it is opposite of the column shifter. Gary

-------------
Gary 73 Gran Torino Sport 351CJ,SVT LIGHTNING,07 CHARGER R/T HEMI,97 Mustang GT Vert

"Never complain Never explain"


Posted By: GranTorinoSport
Date Posted: 15-August-2006 at 4:52AM
Does anyone know where to get the C-6 version of the shift lever in the transmission? All I have ever found was the C-4 version...

-------------
Scott Eklund

Webmaster


Posted By: GranTorinoSport
Date Posted: 06-September-2006 at 6:17AM
Question:
 
Where do you cut the hole for the floor shifter?
 
I have the floor pan exposed and it is not obvious at all there it goes...


-------------
Scott Eklund

Webmaster



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.05 - http://www.webwizforums.com
Copyright ©2001-2022 Web Wiz Ltd. - https://www.webwiz.net