1970-71 montego bench seat to bucket set conversio
Printed From: The Ford Torino Page
Category: Model Specific Forum
Forum Name: 1970-1971 Ford and Mercury
Forum Description: Technical discussion for 1970-1971 Ford and Mercury
URL: https://forum.grantorinosport.org/forum_posts.asp?TID=9997
Printed Date: 26-March-2026 at 3:05PM
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: 1970-71 montego bench seat to bucket set conversio
Posted By: gramzarian
Subject: 1970-71 montego bench seat to bucket set conversio
Date Posted: 27-October-2013 at 9:59AM
|
Are the floor pans different on the bench seat cars and the bucket seat ones |
Replies:
Posted By: Dan the ranchero man
Date Posted: 27-October-2013 at 10:53AM
| No the floorpans will be the same. Like the 72-76 montegos to do a swap on your 70-71 you will just need the seats and the floor attaching hardware for the seat mounts on the inside (close to trans hump). The reliefs for the clips should be in the floor you will just need to mount the clips and go! You may also want to look into the correct seatbelts for buckets. If you are removing from a donor car take everything! |
Posted By: ramair351
Date Posted: 27-October-2013 at 2:25PM
|
the 70-71's take a special seat riser for one of the rear bolt locations. i used a 2x4 chunk as a kid, but for concours guys, you will need the high dollar spacer ------------- -Pete 1972 montego GT 1970 Torino cobra SCJ 1970 mustang mach 1 1965 Falcon futura |
Posted By: gramzarian
Date Posted: 28-October-2013 at 3:32AM
|
thanks for the info |
Posted By: torinojon
Date Posted: 09-November-2013 at 11:15AM
 this is a pic of what you will need to do it..
------------- http://forum.grantorinosport.org/uploads/3190/marti5.jpg |