OFFICIAL FREE STUFF THREAD

shanefolsom wrote: I have a complete set of Cleveland 2v (1973+-)heads if anyone wants them.  Came off a running motor but should be cleaned up and rebuilt since they have been in the garage for a couple years.  I am in NH and do not to ship though.  I could drive and meet someone a short distance, not more than an hour though.  I have them ready to go to the scrap yard but thought if someone wants them I will pull them out of the truck.

shane said he'd drive an hours distance,  you're close enough, he just needs to drive faster!

yeah, book ends / shelf for car books

Sorry that was a bit harsh of me, I know the feeling!!

Local friend up here decided he would use them on a 400m, I guess they bolt up.  Anyways heads will be used.  Feeling good about that.  

FREE!!
ok, time to clean out the storage! here is the list.....
4 67-68 right hand mustang doors. some small usual rust spots in the corners, very usable
1 65-66 right hand door. small rust on the bottom, very usable.
8 ford 5 lug steel wheels. 14 x 7. not bent.
72-73 mustang dash shell
69-70 drum brakes. complete take offs
351C 2V intake with motorcraft carb
lower control arms with a small block sway bar from a 69 mustang

If you are in my neck of the woods, er, um, cactuses, (LOL) stop by and take what you want!

1972 - 1976 Torino doors. Came off a '72 Sportroof, original 2B paint still on them, very straight, have rust. Come get them before I cut them up for sections.

1972 - 1976 Torino trunk lid, very straight, lip rust, original 2B paint still on it. Come get it before it ends up in pieces.

1972 - 1976 Blue Torino steering wheel. Come get it off the column and it is yours.

Upper door section, 2/3's of it left, bottom went to John, rust-free, straight, come get it before it gets cut.

9 inch 1972 axle housing with axles. No chunk, nice. Come get it before CL gets it.

Assorted 1972 - 1976 Torino, Ranchero coil springs. Various rates, complete sets, none sagged noticeably. Come get them before they get scrapped.

1972 rear bumper, nice chrome, was stored in 1975, the shell only, big crease in the center. Nice 1975 school decal on it. Come get it for a core.

Assorted 15 inch and 16 inch tires, all good, come get them before CL gets them.

1974 Gran Torino deluxe wheelcovers, LDO versions in Blue Glow. Come get them before I convert them into garage clocks.

1972 Bumper reinforcement, "U" part that sits below grill, heavy steel. some rust, straight, a hidden part on a completed car. Come get it before I scrap it.

Assorted ignition switches, Torino, Ranchero. Come get them before I figure another use for them.

Assorted other parts I found last weekend that I'd like to donate as well.

Everything is a "Come and get" only. No shipping unless it is a tiny piece that requires no real effort to do, LOL.

Joe did you get a price for shipping and a total on the chrome trim I said ide get from you . Jerry

Joe yes we have several sport and one formal roof . Did you get the PM I sent you ?

Ok Guys come and get it!!!!! Everything is FREE I just want it gone, but can't just throw anything away until I know that no one here wants it first!

ilyes wrote: 1972 351c 2V heads, they need to be rebuild (been sitting for 20 years) 351c 2V intake, and choke stove green headliner (still in the car) Located in Philadelphia PA

You should sell the 2V heads to help with your project, they are still desirable.

I see, they are a unique rare part. I was building a 351C-2V at first, and using M heads to port on. When I went through one port, that's when I could find any C heads any more, in the late 90's. I gave up on the 351 engine and the 400-4V back then, figuring I'd want EFI, and here we are.

Someone will take those 2V heads, they work very well compared to any Windsor head of any year.

I have some bed moulding clips from my 79 Ranchero if someone needs them. I believe they are for the side rails.

Free Standard Door panels for a 2dr. Save them for the metal top. If anyone needs them they are yours just need to pay for shipping..

hi ninja.what year are the door panels.i need a set for a 1972 torino.im in az....